Home Blog Page 86

Pickerbot Plus Outdoor R&D Robot with Jetson TX

0

This is the Pickerbot Plus: an R&D robot for outdoor applications, such as mining and agriculture. It has an UR5e 6-axis robotic arm and 4WD Independent Suspension System. It also comes with a Jetson TX ROS computer, 3D LiDAR and depth camera. The Pickerbot Plus has an expandable design, so you can add voice recognition modules, GPS, and other accessories.

Introducing Pickerbot TV Ads 2

This robot is based on ROS 1 with Yolo 4 computer vision algorithm. It is also compatible with ROS 2.

[where to get it]

HAT: Head-Worn Assistive Teleoperation for Robots

0

Teleoperated robots have the potential to make our lives easier. Controlling them is not easy for people with limited mobility. This video shows a head-worn assisted teleoperation system for mobile manipulators. It has a novel assistive interface with IMU integrated into an everyday clothing article which allows robot teleoperation with residual head motion.

HAT: Head-Worn Assistive Teleoperation of Mobile Manipulators

[HT] [source]

Utility Line Inspections with Autonomous Drones

0

Power outages can be quite costly. Assessing damage to power lines and making fixes can be a lot easier with drones. As this video from Skydio shows, autonomous drones with high resolution cameras and obstacle avoidance system can be used to allow workers to get a close look at electrical equipment without any danger.

Heisenberg LawnMeister AI Vision Robot Mower with App

0

As the weather gets warmer, many of us have to start mowing the lawn again. The Heisenberg LawnMeister can help. It is a robot mower with AI vision that can mow up to 1 acre and overcome slopes up to 58%. With edge trimmer and leaf blower add-ons, you can take even better care of your lawn.

Lydsto P1 Max Auto Recharging Robotic Pool Cleaner

0

Here is another robot that can clean your pool, so you don’t have to break a sweat. The Lydsto P1 Max has a triple brush cleaning system. It can clean a 1937 square feet pool in about 90 minutes. The P1 Max has a 120W motor and filtration performance of 280 LPM. The P1 Max can clean pool walls, floor, and waterline.

P1 Max: World's First Auto-Recharge Pool Cleaner

Nimbo KN1000 Pliable-rigid Hybrid Robotic Manipulator

0

This is the Nimbo KN1000 robot from Wisson Robotics: a pliable-rigid hybrid robotic manipulator with 8 muscle and 3 motors. It is IP55 rated and has max speed of 1/ms. This robot has up to 10kg capacity (H-type). It comes with a collision safe design without a force sensor system.

Nimbo robots are highly dexterous thanks to their pneumatic actuation and mechanical structure. They feature interchangeable end effectors.

[HT]

YUKA-10 Electric RC Robotic Lawn Mower

0

Meet the YUKA-10 Robotic Mower: an RC lawn mower that can handle 30-degree slopes. It has an adjustable cutting height of 30 to 110mm. It uses dual 680mm cutting blades to get the job done. This machine uses a 24Ah replaceable battery that lasts 1.5hr. It can mow 2000m2 per hour.

DragonClaw 3D Printable Pneumatic 3-Finger Gripper

0

This is the DragonClaw: a 3D-printable, pneumatically actuated, three-fingered dexterous gripper with embedded magnetic tactile sensing that can perform power grasps. It can complete a modified Kapandji test with its magnetic sensor (ReSkin) allowing it to respond to external disturbances.

ECOVACS DEEBOT N10+ Robot Vacuum & Mop

0

Robot vacuums are getting smarter all the time. The ECOVACS DEEBOT N10+ Robot is the latest model with 3800Pa suction power and precision mapping that cleans your home efficiently. It has max run-time of 330 minutes (in quiet mode). The ECOVACS DEEBOT N10+ has an auto-empty station with 2.5L dustbag. It uses LidAR & dToF sensors for navigation.

3D Printed Skin for Snake Robots

0

Snake robots are nothing new. We have covered plenty of advanced snakebots for inspection in hard to reach areas. This video shows a 3D printed snakeskin that enhances the slithering locomotion of snake bots. It allows robots to move on rough surfaces. This safeskin has a “soft skin base and embedded rigid scales attached to the robot’s ventral surface.”

More Robots: